- molds and plastics  injection troubleshooter -



• Stringing - plastic injection troubleshooter


• Description:

Stringing is the appearance of a thin plastic string coming from the sprue.


• Causes:
machine

· back pressure too high
· nozzle temperature too high

mould · wrong sprue
material · insufficient melt strength


• Actions:

1st. use suck back: only for crystalline materials
2nd. lower back pressure
3rd. lower or increase nozzle temperature
4th. use different temperature profile
5th do not use sprue breaks


contact :  jmfalcao@webXpace.com

1998-2017  J.Falcao